esp-who/examples/single_chip/camera_web_server/main/Kconfig.projbuild

279 lines
5.9 KiB
Plaintext
Raw Normal View History

2018-11-29 18:23:06 +08:00
menu "Camera Web Server"
menu "WiFi Settings"
config ESP_HOST_NAME
string "Camera Host Name"
default ""
help
Hostname that the camera will advertise over mDNS.
2018-11-29 18:23:06 +08:00
config ESP_WIFI_SSID
string "WiFi STA SSID"
default ""
help
WiFi SSID (network name) to connect to or empty for Off.
config ESP_WIFI_PASSWORD
string "WiFi STA Password"
default ""
help
WiFi Password if WEP/WPA/WPA2 or empty if Open.
config ESP_WIFI_AP_SSID
string "WiFi AP SSID"
default "ESP32-Camera"
help
AP SSID (network name) to create or empty for Off.
config ESP_WIFI_AP_PASSWORD
string "WiFi AP Password"
default ""
help
AP password for WPA2 or empty for Open.
2020-04-29 21:14:31 +08:00
config MAX_STA_CONN
int "Maximal STA connections"
default 1
help
Max number of the STA connects to AP.
2020-04-20 14:36:17 +08:00
config ESP_WIFI_AP_CHANNEL
string "WiFi AP Channel"
default ""
help
AP channel for better connection performance.
2019-01-04 14:11:55 +08:00
config SERVER_IP
string "WiFi AP IP Address"
2019-01-04 14:11:55 +08:00
default "192.168.4.1"
help
IP address that the ESP will assign to it's AP interface. You can use this IP to connect to the camera after flashing.
2019-01-04 14:11:55 +08:00
2018-11-29 18:23:06 +08:00
config ESP_MAXIMUM_RETRY
int "Maximum retry"
default 5
help
Set the Maximum retry to avoid station reconnecting to the AP unlimited when the AP is really inexistent.
endmenu
menu "LED Illuminator"
config LED_ILLUMINATOR_ENABLED
bool "LED Illuminator Enabled"
default n
help
Enable an LED Flash or IR Illuminator
config LED_LEDC_PIN
depends on LED_ILLUMINATOR_ENABLED
int "LED Illuminator GPIO Pin"
range 0 33
default 4
help
Set a pin to illuminate an onboard LED or IR Illuminator when streaming or taking snapshots.
config LED_MAX_INTENSITY
depends on LED_ILLUMINATOR_ENABLED
int "LED Maximum Intensity (0-255)"
range 0 255
default 255
help
Limit the maximum intensity of the LED while streaming to prevent overheating (0-255).
choice LED_LEDC_SPEED_MODE
depends on LED_ILLUMINATOR_ENABLED
bool "Select LEDC Timer Speed Mode"
default LED_LEDC_LOW_SPEED_MODE
help
Select a speed mode for the LEDC channel
config LED_LEDC_LOW_SPEED_MODE
bool "LOW_SPEED_MODE"
config LED_LEDC_HIGH_SPEED_MODE
bool "HIGH_SPEED_MODE"
endchoice
config LED_LEDC_TIMER
depends on LED_ILLUMINATOR_ENABLED
int "LEDC Timer"
range 0 3
default 1
help
Select the LEDC Timer (0-3)
config LED_LEDC_CHANNEL
depends on LED_ILLUMINATOR_ENABLED
int "LEDC Channel"
range 0 7
default 1
help
Select the LEDC Channel (0-7)
endmenu
2018-11-29 18:23:06 +08:00
menu "Camera Pins"
choice CAMERA_MODEL
bool "Select Camera Pinout"
default CAMERA_MODEL_WROVER_KIT
help
Select Camera Pinout.
config CAMERA_MODEL_WROVER_KIT
bool "WROVER-KIT With OV2640 Module"
config CAMERA_MODEL_ESP32_CAM_BOARD
bool "ESP32 Camera Development Board"
config CAMERA_MODEL_ESP_EYE
bool "ESP_EYE DevKit"
2018-11-29 18:23:06 +08:00
config CAMERA_MODEL_M5STACK_PSRAM
bool "M5Stack Camera With PSRAM"
config CAMERA_MODEL_M5STACK_WIDE
bool "M5Stack Camera F (Wide)"
2018-12-13 04:12:15 +08:00
config CAMERA_MODEL_AI_THINKER
2018-12-13 03:57:37 +08:00
bool "ESP32-CAM by AI-Thinker"
2018-11-29 18:23:06 +08:00
config CAMERA_MODEL_CUSTOM
bool "Custom Camera Pinout"
endchoice
config CAMERA_PIN_PWDN
depends on CAMERA_MODEL_CUSTOM
int "Power Down pin"
range -1 33
default -1
help
Select Power Down pin or -1 for unmanaged.
config CAMERA_PIN_RESET
depends on CAMERA_MODEL_CUSTOM
int "Reset pin"
range -1 33
default -1
help
Select Camera Reset pin or -1 for software reset.
config CAMERA_PIN_XCLK
depends on CAMERA_MODEL_CUSTOM
int "XCLK pin"
range 0 33
default 21
help
Select Camera XCLK pin.
config CAMERA_PIN_SIOD
depends on CAMERA_MODEL_CUSTOM
int "SIOD pin"
range 0 33
default 26
help
Select Camera SIOD pin.
config CAMERA_PIN_SIOC
depends on CAMERA_MODEL_CUSTOM
int "SIOC pin"
range 0 33
default 27
help
Select Camera SIOC pin.
config CAMERA_PIN_VSYNC
depends on CAMERA_MODEL_CUSTOM
int "VSYNC pin"
range 0 39
default 25
help
Select Camera VSYNC pin.
config CAMERA_PIN_HREF
depends on CAMERA_MODEL_CUSTOM
int "HREF pin"
range 0 39
default 23
help
Select Camera HREF pin.
config CAMERA_PIN_PCLK
depends on CAMERA_MODEL_CUSTOM
int "PCLK pin"
range 0 39
default 25
help
Select Camera PCLK pin.
config CAMERA_PIN_Y2
depends on CAMERA_MODEL_CUSTOM
int "Y2 pin"
range 0 39
default 4
help
Select Camera Y2 pin.
config CAMERA_PIN_Y3
depends on CAMERA_MODEL_CUSTOM
int "Y3 pin"
range 0 39
default 5
help
Select Camera Y3 pin.
config CAMERA_PIN_Y4
depends on CAMERA_MODEL_CUSTOM
int "Y4 pin"
range 0 39
default 18
help
Select Camera Y4 pin.
config CAMERA_PIN_Y5
depends on CAMERA_MODEL_CUSTOM
int "Y5 pin"
range 0 39
default 19
help
Select Camera Y5 pin.
config CAMERA_PIN_Y6
depends on CAMERA_MODEL_CUSTOM
int "Y6 pin"
range 0 39
default 36
help
Select Camera Y6 pin.
config CAMERA_PIN_Y7
depends on CAMERA_MODEL_CUSTOM
int "Y7 pin"
range 0 39
default 39
help
Select Camera Y7 pin.
config CAMERA_PIN_Y8
depends on CAMERA_MODEL_CUSTOM
int "Y8 pin"
range 0 39
default 34
help
Select Camera Y8 pin.
config CAMERA_PIN_Y9
depends on CAMERA_MODEL_CUSTOM
int "Y9 pin"
range 0 39
default 35
help
Select Camera Y9 pin.
endmenu
config ESP_FACE_DETECT_ENABLED
bool "ESP-WHO Face Detection"
default y
help
Enables ESP-WHO Face Detection through the web interface.
config ESP_FACE_RECOGNITION_ENABLED
bool "ESP-WHO Face Recognition"
2020-08-13 20:42:05 +08:00
depends on ESP_FACE_DETECT_ENABLED
2018-11-29 18:23:06 +08:00
default y
help
Enables ESP-WHO Face Recognition through the web interface.
endmenu