371 lines
12 KiB
C++
371 lines
12 KiB
C++
|
/* ILI9341_SPI example
|
||
|
|
|
||
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
||
|
|
|
||
|
|
Unless required by applicable law or agreed to in writing, this
|
||
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
||
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
Some info about the ILI9341: It has an C/D line, which is connected to a GPIO here. It expects this
|
||
|
|
line to be low for a command and high for data. We use a pre-transmit callback to control that line
|
||
|
|
|
||
|
|
every transaction has as the user-definable argument the needed state of the D/C line and just
|
||
|
|
before the transaction is sent, the callback will set this line to the correct state.
|
||
|
|
Note: If not using ESP WROVER KIT, Users must change the pins by setting macro in file spi_ili.c
|
||
|
|
|
||
|
|
To change the fonts style include the header of your desired font from the "component/includes" folder
|
||
|
|
and simply pass the address of its GFXfont to setFont API
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*C Includes*/
|
||
|
|
#include <stdio.h>
|
||
|
|
#include <stdlib.h>
|
||
|
|
#include <string.h>
|
||
|
|
|
||
|
|
/*RTOS Includes*/
|
||
|
|
#include "freertos/FreeRTOS.h"
|
||
|
|
#include "freertos/task.h"
|
||
|
|
#include "freertos/event_groups.h"
|
||
|
|
#include "freertos/semphr.h"
|
||
|
|
|
||
|
|
/*SPI Includes*/
|
||
|
|
#include "driver/spi_master.h"
|
||
|
|
#include "iot_lcd.h"
|
||
|
|
#include "Adafruit_GFX.h"
|
||
|
|
#include "image.h"
|
||
|
|
#include "lcd_image.h"
|
||
|
|
|
||
|
|
#include "esp_wifi.h"
|
||
|
|
#include "esp_log.h"
|
||
|
|
#include "esp_system.h"
|
||
|
|
#include "esp_event_loop.h"
|
||
|
|
|
||
|
|
/*Include desired font here*/
|
||
|
|
#define PROGMEM
|
||
|
|
#include "FreeSans9pt7b.h"
|
||
|
|
#include "FreeMono9pt7b.h"
|
||
|
|
#include "FreeSerif9pt7b.h"
|
||
|
|
#include "FreeSerifItalic9pt7b.h"
|
||
|
|
#include "unity.h"
|
||
|
|
|
||
|
|
static CEspLcd* tft_obj = NULL;
|
||
|
|
|
||
|
|
//-------------TEST CODE-----------------
|
||
|
|
float target_room_temperature = 23.5;
|
||
|
|
|
||
|
|
int color(uint8_t r, uint8_t g, uint8_t b)
|
||
|
|
{
|
||
|
|
return ((r & 248) | g >> 5) << 8 | ((g & 28) << 3 | b >> 3);
|
||
|
|
}
|
||
|
|
|
||
|
|
int drawPlaceholder(CEspLcd* tft, int x, int y, int width, int height, int bordercolor, const char* headertext, int header_text_offset, const GFXfont* font)
|
||
|
|
{
|
||
|
|
int headersize = 20;
|
||
|
|
tft->setTextColor(COLOR_GREEN, COLOR_BLACK);
|
||
|
|
|
||
|
|
tft->drawRoundRect(x, y, width, height, 3, bordercolor);
|
||
|
|
if (font) {
|
||
|
|
tft->setFont(font);
|
||
|
|
tft->drawString(headertext, x + header_text_offset, y + 1 + 14);
|
||
|
|
} else {
|
||
|
|
tft->drawString(headertext, x + header_text_offset, y + 1);
|
||
|
|
}
|
||
|
|
tft->drawFastHLine(x, y + headersize, width, bordercolor);
|
||
|
|
tft->setFont(NULL);
|
||
|
|
return y + headersize;
|
||
|
|
}
|
||
|
|
const GFXfont* title_font = &FreeSerif9pt7b;
|
||
|
|
const GFXfont* text_font = &FreeSerif9pt7b;
|
||
|
|
const GFXfont* num_font = &FreeSerif9pt7b;
|
||
|
|
|
||
|
|
void update_huminity(CEspLcd* tft, int hum)
|
||
|
|
{
|
||
|
|
tft->setFont(num_font);
|
||
|
|
char dtmp[10];
|
||
|
|
memset(dtmp, 0, sizeof(dtmp));
|
||
|
|
sprintf(dtmp, "%d %%", hum);
|
||
|
|
tft->fillRect(193, 32, 25, 26, COLOR_BLACK);
|
||
|
|
tft->drawString(dtmp, 195, 50);
|
||
|
|
}
|
||
|
|
|
||
|
|
void update_brightness(CEspLcd* tft, float bright)
|
||
|
|
{
|
||
|
|
tft->fillRect(193, 72, 55, 26, COLOR_BLACK);
|
||
|
|
tft->drawFloat(bright, 1, 195, 90);
|
||
|
|
}
|
||
|
|
|
||
|
|
void drawTargetTemp(CEspLcd* tft, float temp)
|
||
|
|
{
|
||
|
|
tft->setTextColor(COLOR_WHITE, COLOR_BLACK);
|
||
|
|
tft->drawFloatSevSeg(temp, 1, 7, 54, 7);
|
||
|
|
}
|
||
|
|
|
||
|
|
void drawWireFrame(CEspLcd* tft)
|
||
|
|
{
|
||
|
|
tft->setTextColor(COLOR_GREEN, COLOR_BLACK);
|
||
|
|
//Target placeholder
|
||
|
|
drawPlaceholder(tft, 0, 28, 136, 78, COLOR_RED, "Temperature", 30, title_font);
|
||
|
|
tft->setFont(NULL);
|
||
|
|
//Temperatures placeholder
|
||
|
|
int placeholderbody = drawPlaceholder(tft, 138, 0, 180, 106, COLOR_RED, "Sensor", 60, title_font);
|
||
|
|
|
||
|
|
tft->setTextColor(COLOR_WHITE, COLOR_BLACK);
|
||
|
|
tft->setFont(num_font);
|
||
|
|
tft->drawBitmap(150, placeholderbody + 5 , (uint16_t*)water_pic_35, 35, 35);
|
||
|
|
update_huminity(tft, 68);
|
||
|
|
|
||
|
|
tft->drawBitmap(150, placeholderbody + 45 , (uint16_t*)brightness_pic_35, 35, 35);
|
||
|
|
update_brightness(tft, 1536.12);
|
||
|
|
//Status placeholder
|
||
|
|
tft->setTextColor(COLOR_GREEN, COLOR_BLACK);
|
||
|
|
placeholderbody = drawPlaceholder(tft, 0, 140, 319, 97, COLOR_RED, "STATUS", 110, title_font);
|
||
|
|
|
||
|
|
tft->setTextColor(COLOR_WHITE, COLOR_BLACK);
|
||
|
|
tft->setFont(NULL);
|
||
|
|
tft->drawString("WiFi : ", 6, placeholderbody + 2);
|
||
|
|
tft->drawString("Signal : ", 6, placeholderbody + 22);
|
||
|
|
tft->drawString("Status : ", 6, placeholderbody + 42);
|
||
|
|
}
|
||
|
|
|
||
|
|
void setupUI(CEspLcd* tft)
|
||
|
|
{
|
||
|
|
tft->setRotation(3);
|
||
|
|
tft->fillScreen(COLOR_BLACK);
|
||
|
|
|
||
|
|
tft->drawBitmap(0, 0, Status_320_240, 320, 240);
|
||
|
|
vTaskDelay(1000 / portTICK_PERIOD_MS);
|
||
|
|
|
||
|
|
while (1) {
|
||
|
|
tft->fillRect(0, 0, 320, 240, COLOR_BLUE);
|
||
|
|
vTaskDelay(500 / portTICK_PERIOD_MS);
|
||
|
|
|
||
|
|
tft->fillRect(0, 0, 320, 240, COLOR_GREEN);
|
||
|
|
vTaskDelay(500 / portTICK_PERIOD_MS);
|
||
|
|
|
||
|
|
tft->invertDisplay(1);
|
||
|
|
tft->drawBitmap(0, 0, Status_320_240, 320, 240);
|
||
|
|
vTaskDelay(500 / portTICK_PERIOD_MS);
|
||
|
|
tft->fillScreen(COLOR_BLACK);
|
||
|
|
tft->drawBitmap(0, 0, esp_logo, 137, 26);
|
||
|
|
drawWireFrame(tft);
|
||
|
|
drawTargetTemp(tft, target_room_temperature);
|
||
|
|
vTaskDelay(500 / portTICK_PERIOD_MS);
|
||
|
|
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
tft->invertDisplay(0);
|
||
|
|
tft->fillScreen(COLOR_BLACK);
|
||
|
|
tft->drawBitmap(0, 0, esp_logo, 137, 26);
|
||
|
|
drawWireFrame(tft);
|
||
|
|
drawTargetTemp(tft, target_room_temperature);
|
||
|
|
}
|
||
|
|
//=======================================
|
||
|
|
|
||
|
|
//--------- SENSOR ----------
|
||
|
|
#include "driver/i2c.h"
|
||
|
|
#include "iot_i2c_bus.h"
|
||
|
|
#include "iot_hts221.h"
|
||
|
|
#include "iot_bh1750.h"
|
||
|
|
|
||
|
|
#define I2C_MASTER_SCL_IO GPIO_NUM_27 /*!< gpio number for I2C master clock */
|
||
|
|
#define I2C_MASTER_SDA_IO GPIO_NUM_26 /*!< gpio number for I2C master data */
|
||
|
|
#define I2C_MASTER_NUM I2C_NUM_1 /*!< I2C port number for master dev */
|
||
|
|
#define I2C_MASTER_TX_BUF_DISABLE 0 /*!< I2C master do not need buffer */
|
||
|
|
#define I2C_MASTER_RX_BUF_DISABLE 0 /*!< I2C master do not need buffer */
|
||
|
|
#define I2C_MASTER_FREQ_HZ 100000 /*!< I2C master clock frequency */
|
||
|
|
|
||
|
|
static i2c_bus_handle_t i2c_bus = NULL;
|
||
|
|
static hts221_handle_t hts221 = NULL;
|
||
|
|
static bh1750_handle_t bh1750 = NULL;
|
||
|
|
|
||
|
|
|
||
|
|
void hts221_test_task()
|
||
|
|
{
|
||
|
|
uint8_t hts221_deviceid;
|
||
|
|
|
||
|
|
iot_hts221_get_deviceid(hts221, &hts221_deviceid);
|
||
|
|
printf("hts221 device ID is: %02x\n", hts221_deviceid);
|
||
|
|
hts221_config_t hts221_config;
|
||
|
|
iot_hts221_get_config(hts221, &hts221_config);
|
||
|
|
|
||
|
|
hts221_config.avg_h = HTS221_AVGH_32;
|
||
|
|
hts221_config.avg_t = HTS221_AVGT_16;
|
||
|
|
hts221_config.odr = HTS221_ODR_1HZ;
|
||
|
|
hts221_config.bdu_status = HTS221_DISABLE;
|
||
|
|
hts221_config.heater_status = HTS221_DISABLE;
|
||
|
|
iot_hts221_set_config(hts221, &hts221_config);
|
||
|
|
iot_hts221_set_activate(hts221);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief i2c master initialization
|
||
|
|
*/
|
||
|
|
void i2c_sensor_init()
|
||
|
|
{
|
||
|
|
// int i2c_master_port = I2C_MASTER_NUM;
|
||
|
|
i2c_config_t conf;
|
||
|
|
conf.mode = I2C_MODE_MASTER;
|
||
|
|
conf.sda_io_num = I2C_MASTER_SDA_IO;
|
||
|
|
conf.sda_pullup_en = GPIO_PULLUP_ENABLE;
|
||
|
|
conf.scl_io_num = I2C_MASTER_SCL_IO;
|
||
|
|
conf.scl_pullup_en = GPIO_PULLUP_ENABLE;
|
||
|
|
conf.master.clk_speed = I2C_MASTER_FREQ_HZ;
|
||
|
|
i2c_bus = iot_i2c_bus_create(I2C_MASTER_NUM, &conf);
|
||
|
|
hts221 = iot_hts221_create(i2c_bus, HTS221_I2C_ADDRESS);
|
||
|
|
|
||
|
|
uint8_t hts221_deviceid;
|
||
|
|
iot_hts221_get_deviceid(hts221, &hts221_deviceid);
|
||
|
|
printf("hts221 device ID is: %02x\n", hts221_deviceid);
|
||
|
|
hts221_config_t hts221_config;
|
||
|
|
iot_hts221_get_config(hts221, &hts221_config);
|
||
|
|
printf("avg_h is: %02x\n", hts221_config.avg_h);
|
||
|
|
printf("avg_t is: %02x\n", hts221_config.avg_t);
|
||
|
|
printf("odr is: %02x\n", hts221_config.odr);
|
||
|
|
printf("bdu_status is: %02x\n", hts221_config.bdu_status);
|
||
|
|
printf("heater_status is: %02x\n", hts221_config.heater_status);
|
||
|
|
printf("irq_level is: %02x\n", hts221_config.irq_level);
|
||
|
|
printf("irq_output_type is: %02x\n", hts221_config.irq_output_type);
|
||
|
|
printf("irq_enable is: %02x\n", hts221_config.irq_enable);
|
||
|
|
hts221_config.avg_h = HTS221_AVGH_32;
|
||
|
|
hts221_config.avg_t = HTS221_AVGT_16;
|
||
|
|
hts221_config.odr = HTS221_ODR_1HZ;
|
||
|
|
hts221_config.bdu_status = HTS221_DISABLE;
|
||
|
|
hts221_config.heater_status = HTS221_DISABLE;
|
||
|
|
iot_hts221_set_config(hts221, &hts221_config);
|
||
|
|
iot_hts221_set_activate(hts221);
|
||
|
|
|
||
|
|
bh1750 = iot_bh1750_create(i2c_bus, 0x23);
|
||
|
|
hts221_test_task();
|
||
|
|
}
|
||
|
|
|
||
|
|
// -------------------------
|
||
|
|
#define LCD_DATA_TEMP (1)
|
||
|
|
#define LCD_DATA_HUM (2)
|
||
|
|
#define LCD_DATA_BRI (3)
|
||
|
|
|
||
|
|
QueueHandle_t lcd_data_queue = NULL;
|
||
|
|
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
int type;
|
||
|
|
union
|
||
|
|
{
|
||
|
|
float temp;
|
||
|
|
int hum;
|
||
|
|
float brightness;
|
||
|
|
};
|
||
|
|
} lcd_data_t;
|
||
|
|
|
||
|
|
|
||
|
|
extern "C" void demo_lcd_init()
|
||
|
|
{
|
||
|
|
if (lcd_data_queue == NULL) {
|
||
|
|
lcd_data_queue = xQueueCreate(10, sizeof(lcd_data_t));
|
||
|
|
}
|
||
|
|
/*Initialize LCD*/
|
||
|
|
lcd_conf_t lcd_pins = {
|
||
|
|
.lcd_model = LCD_MOD_AUTO_DET,
|
||
|
|
.pin_num_miso = GPIO_NUM_25,
|
||
|
|
.pin_num_mosi = GPIO_NUM_23,
|
||
|
|
.pin_num_clk = GPIO_NUM_19,
|
||
|
|
.pin_num_cs = GPIO_NUM_22,
|
||
|
|
.pin_num_dc = GPIO_NUM_21,
|
||
|
|
.pin_num_rst = GPIO_NUM_18,
|
||
|
|
.pin_num_bckl = GPIO_NUM_5,
|
||
|
|
.clk_freq = 30000000,
|
||
|
|
.rst_active_level = 0,
|
||
|
|
.bckl_active_level = 0,
|
||
|
|
.spi_host = HSPI_HOST,
|
||
|
|
.init_spi_bus = true,
|
||
|
|
};
|
||
|
|
|
||
|
|
if (tft_obj == NULL) {
|
||
|
|
tft_obj = new CEspLcd(&lcd_pins);
|
||
|
|
}
|
||
|
|
setupUI(tft_obj);
|
||
|
|
}
|
||
|
|
|
||
|
|
void lcd_update_task(void* arg)
|
||
|
|
{
|
||
|
|
lcd_data_t data;
|
||
|
|
while (1) {
|
||
|
|
int ret = xQueueReceive(lcd_data_queue, &data, portMAX_DELAY);
|
||
|
|
if (ret == pdTRUE) {
|
||
|
|
switch (data.type) {
|
||
|
|
case LCD_DATA_TEMP:
|
||
|
|
printf("val recv: %f\n", data.temp);
|
||
|
|
drawTargetTemp(tft_obj, data.temp);
|
||
|
|
break;
|
||
|
|
case LCD_DATA_HUM:
|
||
|
|
printf("recv hum: %d\n", data.hum);
|
||
|
|
update_huminity(tft_obj, data.hum);
|
||
|
|
break;
|
||
|
|
case LCD_DATA_BRI:
|
||
|
|
printf("recv bri: %f\n", data.brightness);
|
||
|
|
update_brightness(tft_obj, data.brightness);
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
printf("data type error: %d\n", data.type);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
void demo_sensor_read_task(void* arg)
|
||
|
|
{
|
||
|
|
|
||
|
|
int16_t temperature, temperature_last = 0;
|
||
|
|
int16_t humidity, humidity_last = 0;
|
||
|
|
float bh1750_data, bh1750_data_last = 0;
|
||
|
|
lcd_data_t data;
|
||
|
|
|
||
|
|
while (1) {
|
||
|
|
printf("\n********HTS221 HUMIDITY&TEMPERATURE SENSOR********\n");
|
||
|
|
iot_hts221_get_humidity(hts221, &humidity);
|
||
|
|
printf("humidity value is: %2.2f\n", (float)humidity / 10);
|
||
|
|
iot_hts221_get_temperature(hts221, &temperature);
|
||
|
|
printf("temperature value is: %2.2f\n", (float)temperature / 10);
|
||
|
|
if (temperature_last != temperature) {
|
||
|
|
data.type = LCD_DATA_TEMP;
|
||
|
|
data.temp = (float) temperature / 10;
|
||
|
|
printf("send temp: %f\n", data.temp);
|
||
|
|
xQueueSend(lcd_data_queue, &data, portMAX_DELAY);
|
||
|
|
temperature_last = temperature;
|
||
|
|
}
|
||
|
|
if (humidity_last != humidity) {
|
||
|
|
data.type = LCD_DATA_HUM;
|
||
|
|
data.hum = humidity / 10;
|
||
|
|
printf("send hum: %d\n", data.hum);
|
||
|
|
xQueueSend(lcd_data_queue, &data, portMAX_DELAY);
|
||
|
|
humidity_last = humidity;
|
||
|
|
}
|
||
|
|
|
||
|
|
iot_bh1750_power_on(bh1750);
|
||
|
|
iot_bh1750_set_measure_mode(bh1750, BH1750_ONETIME_4LX_RES);
|
||
|
|
vTaskDelay(30 / portTICK_RATE_MS);
|
||
|
|
|
||
|
|
iot_bh1750_get_data(bh1750, &bh1750_data);
|
||
|
|
printf("brightness: %f\n", bh1750_data);
|
||
|
|
if (bh1750_data_last != bh1750_data) {
|
||
|
|
data.type = LCD_DATA_BRI;
|
||
|
|
data.brightness = bh1750_data;
|
||
|
|
printf("send hum: %f\n", data.brightness);
|
||
|
|
xQueueSend(lcd_data_queue, &data, portMAX_DELAY);
|
||
|
|
bh1750_data_last = bh1750_data;
|
||
|
|
}
|
||
|
|
vTaskDelay(2000 / portTICK_PERIOD_MS);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
TEST_CASE("LCD thermostat test", "[lcd_demo][iot]")
|
||
|
|
{
|
||
|
|
i2c_sensor_init();
|
||
|
|
demo_lcd_init();
|
||
|
|
xTaskCreate(lcd_update_task, "lcd_update_task", 2048 * 2, NULL, 10, NULL);
|
||
|
|
xTaskCreate(demo_sensor_read_task, "demo_sensor_read_task", 2048, NULL, 10, NULL);
|
||
|
|
}
|
||
|
|
|
||
|
|
|