esp-who/components/common/Kconfig

315 lines
8.9 KiB
Plaintext
Raw Normal View History

menu "ESP-WHO General Configuration"
menu "Camera Configuration"
choice PIXEL_FORMAT
bool "Select Camera Pixel Format"
default CAMERA_PIXEL_FORMAT_RGB565
help
Select Camera Pixel Format.
config CAMERA_PIXEL_FORMAT_RGB565
bool "RGB565"
config CAMERA_PIXEL_FORMAT_YUV422
bool "YUV422"
config CAMERA_PIXEL_FORMAT_GRAYSCALE
bool "GRAYSCALE"
config CAMERA_PIXEL_FORMAT_JPEG
bool "JPEG"
config CAMERA_PIXEL_FORMAT_RGB888
bool "RGB888"
config CAMERA_PIXEL_FORMAT_RAW
bool "RAW"
config CAMERA_PIXEL_FORMAT_RGB444
bool "RGB444"
config CAMERA_PIXEL_FORMAT_RGB555
bool "RGB555"
endchoice
choice CAMERA_MODULE
bool "Select Camera Pinout"
default CAMERA_MODULE_WROVER_KIT
help
Select Camera Pinout.
config CAMERA_MODULE_WROVER_KIT
bool "WROVER-KIT With OV2640 Module"
config CAMERA_MODULE_ESP_EYE
bool "ESP-EYE DevKit"
config CAMERA_MODULE_ESP_S3_EYE
bool "ESP-S3-EYE DevKit"
config CAMERA_MODEL_ESP32_CAM_BOARD
bool "ESP32 Camera Development Board"
config CAMERA_MODULE_M5STACK_PSRAM
bool "M5Stack Camera With PSRAM"
config CAMERA_MODULE_M5STACK_WIDE
bool "M5Stack Camera F (Wide)"
config CAMERA_MODULE_AI_THINKER
bool "ESP32-CAM by AI-Thinker"
config CAMERA_MODULE_CUSTOM
bool "Custom Camera Pinout"
endchoice
config CAMERA_PIN_PWDN
depends on CAMERA_MODULE_CUSTOM
int "Power Down pin"
range -1 33
default -1
help
Select Power Down pin or -1 for unmanaged.
config CAMERA_PIN_RESET
depends on CAMERA_MODULE_CUSTOM
int "Reset pin"
range -1 33
default -1
help
Select Camera Reset pin or -1 for software reset.
config CAMERA_PIN_XCLK
depends on CAMERA_MODULE_CUSTOM
int "XCLK pin"
range 0 33
default 21
help
Select Camera XCLK pin.
config CAMERA_PIN_SIOD
depends on CAMERA_MODULE_CUSTOM
int "SIOD pin"
range 0 33
default 26
help
Select Camera SIOD pin.
config CAMERA_PIN_SIOC
depends on CAMERA_MODULE_CUSTOM
int "SIOC pin"
range 0 33
default 27
help
Select Camera SIOC pin.
config CAMERA_PIN_VSYNC
depends on CAMERA_MODULE_CUSTOM
int "VSYNC pin"
range 0 39
default 25
help
Select Camera VSYNC pin.
config CAMERA_PIN_HREF
depends on CAMERA_MODULE_CUSTOM
int "HREF pin"
range 0 39
default 23
help
Select Camera HREF pin.
config CAMERA_PIN_PCLK
depends on CAMERA_MODULE_CUSTOM
int "PCLK pin"
range 0 39
default 25
help
Select Camera PCLK pin.
config CAMERA_PIN_Y2
depends on CAMERA_MODULE_CUSTOM
int "Y2 pin"
range 0 39
default 4
help
Select Camera Y2 pin.
config CAMERA_PIN_Y3
depends on CAMERA_MODULE_CUSTOM
int "Y3 pin"
range 0 39
default 5
help
Select Camera Y3 pin.
config CAMERA_PIN_Y4
depends on CAMERA_MODULE_CUSTOM
int "Y4 pin"
range 0 39
default 18
help
Select Camera Y4 pin.
config CAMERA_PIN_Y5
depends on CAMERA_MODULE_CUSTOM
int "Y5 pin"
range 0 39
default 19
help
Select Camera Y5 pin.
config CAMERA_PIN_Y6
depends on CAMERA_MODULE_CUSTOM
int "Y6 pin"
range 0 39
default 36
help
Select Camera Y6 pin.
config CAMERA_PIN_Y7
depends on CAMERA_MODULE_CUSTOM
int "Y7 pin"
range 0 39
default 39
help
Select Camera Y7 pin.
config CAMERA_PIN_Y8
depends on CAMERA_MODULE_CUSTOM
int "Y8 pin"
range 0 39
default 34
help
Select Camera Y8 pin.
config CAMERA_PIN_Y9
depends on CAMERA_MODULE_CUSTOM
int "Y9 pin"
range 0 39
default 35
help
Select Camera Y9 pin.
endmenu
menu "LED Illuminator"
config LED_ILLUMINATOR_ENABLED
bool "LED Illuminator Enabled"
default n
help
Enable an LED Flash or IR Illuminator
config LED_LEDC_PIN
depends on LED_ILLUMINATOR_ENABLED
int "LED Illuminator GPIO Pin"
range 0 33
default 4
help
Set a pin to illuminate an onboard LED or IR Illuminator when streaming or taking snapshots.
config LED_MAX_INTENSITY
depends on LED_ILLUMINATOR_ENABLED
int "LED Maximum Intensity (0-255)"
range 0 255
default 255
help
Limit the maximum intensity of the LED while streaming to prevent overheating (0-255).
choice LED_LEDC_SPEED_MODE
depends on LED_ILLUMINATOR_ENABLED
bool "Select LEDC Timer Speed Mode"
default LED_LEDC_LOW_SPEED_MODE
help
Select a speed mode for the LEDC channel
config LED_LEDC_LOW_SPEED_MODE
bool "LOW_SPEED_MODE"
config LED_LEDC_HIGH_SPEED_MODE
bool "HIGH_SPEED_MODE"
endchoice
config LED_LEDC_TIMER
depends on LED_ILLUMINATOR_ENABLED
int "LEDC Timer"
range 0 3
default 1
help
Select the LEDC Timer (0-3)
config LED_LEDC_CHANNEL
depends on LED_ILLUMINATOR_ENABLED
int "LEDC Channel"
range 0 7
default 1
help
Select the LEDC Channel (0-7)
endmenu
menu "DL Configuration"
config DL_ENABLED
bool "Enable Deep-Learning Application"
default y
choice DL_SELECT_APP
bool "Select Application"
depends on DL_ENABLED
default DL_HUMAN_FACE
config DL_HUMAN_FACE
bool "Human Face"
config DL_CAT_FACE
bool "Cat Face"
config DL_HUMAN_HAND
bool "Human Hand"
endchoice
# Human Face Series
choice DL_HUMAN_FACE_DETECTION_S1_MODEL
bool "Select Human Face Detection Stage-1 Model"
depends on DL_HUMAN_FACE
default DL_HUMAN_FACE_DETECTION_S1_MSR01
config DL_HUMAN_FACE_DETECTION_S1_MSR01
bool "HumanFaceDetectMSR01"
endchoice
config DL_HUMAN_FACE_DETECTION_S2_ENABLED
bool "Enable Human Face Detection Stage-2"
depends on DL_HUMAN_FACE
default y
choice DL_HUMAN_FACE_DETECTION_S2_MODEL
bool "Select Human Face Detection Stage-2 Model"
depends on DL_HUMAN_FACE_DETECTION_S2_ENABLED
default DL_HUMAN_FACE_DETECTION_S2_MNP01
config DL_HUMAN_FACE_DETECTION_S2_MNP01
bool "HumanFaceDetectMNP01"
endchoice
config DL_HUMAN_FACE_RECOGNITION_ENABLED
bool "Enable Human Face Recognition"
depends on DL_HUMAN_FACE_DETECTION_S2_ENABLED
default y
choice DL_HUMAN_FACE_RECOGNITION_MODEL
bool "Select Human Face Recognition Model"
depends on DL_HUMAN_FACE_RECOGNITION_ENABLED
default DL_HUMAN_FACE_RECOGNITION_XXX
config DL_HUMAN_FACE_RECOGNITION_XXX
bool "HumanFaceRecognizeXXX"
endchoice
# Cat Face Series
choice DL_CAT_FACE_DETECTION_MODEL
bool "Select Cat Face Detection Model"
depends on DL_CAT_FACE
default DL_CAT_FACE_DETECTION_MN03
config DL_CAT_FACE_DETECTION_MN03
bool "CatFaceDetectMN03"
endchoice
# Human Hand Series
2021-08-03 16:11:34 +08:00
config DL_MOVING_TARGET_DETECTION_ENABLED
bool "Enable Moving Target Detection"
default y
endmenu
endmenu