menu "Camera Web Server" menu "WiFi Settings" config ESP_WIFI_SSID string "WiFi STA SSID" default "" help WiFi SSID (network name) to connect to or empty for Off. config ESP_WIFI_PASSWORD string "WiFi STA Password" default "" help WiFi Password if WEP/WPA/WPA2 or empty if Open. config ESP_WIFI_AP_SSID string "WiFi AP SSID" default "ESP32-Camera" help AP SSID (network name) to create or empty for Off. config ESP_WIFI_AP_PASSWORD string "WiFi AP Password" default "" help AP password for WPA2 or empty for Open. config SERVER_IP string "WiFi AP IP Address" default "192.168.4.1" help IP address that the ESP will assign to it's AP interface. You can use this IP to connect to the camera after flashing. config ESP_MAXIMUM_RETRY int "Maximum retry" default 5 help Set the Maximum retry to avoid station reconnecting to the AP unlimited when the AP is really inexistent. endmenu menu "LED Illuminator" config LED_ILLUMINATOR_ENABLED bool "LED Illuminator Enabled" default n help Enable an LED Flash or IR Illuminator config LED_LEDC_PIN depends on LED_ILLUMINATOR_ENABLED int "LED Illuminator GPIO Pin" range 0 33 default 4 help Set a pin to illuminate an onboard LED or IR Illuminator when streaming or taking snapshots. config LED_MAX_INTENSITY depends on LED_ILLUMINATOR_ENABLED int "LED Maximum Intensity (0-255)" range 0 255 default 255 help Limit the maximum intensity of the LED while streaming to prevent overheating (0-255). choice LED_LEDC_SPEED_MODE depends on LED_ILLUMINATOR_ENABLED bool "Select LEDC Timer Speed Mode" default LED_LEDC_LOW_SPEED_MODE help Select a speed mode for the LEDC channel config LED_LEDC_LOW_SPEED_MODE bool "LOW_SPEED_MODE" config LED_LEDC_HIGH_SPEED_MODE bool "HIGH_SPEED_MODE" endchoice config LED_LEDC_TIMER depends on LED_ILLUMINATOR_ENABLED int "LEDC Timer" range 0 3 default 1 help Select the LEDC Timer (0-3) config LED_LEDC_CHANNEL depends on LED_ILLUMINATOR_ENABLED int "LEDC Channel" range 0 7 default 1 help Select the LEDC Channel (0-7) endmenu menu "Camera Pins" choice CAMERA_MODEL bool "Select Camera Pinout" default CAMERA_MODEL_WROVER_KIT help Select Camera Pinout. config CAMERA_MODEL_WROVER_KIT bool "WROVER-KIT With OV2640 Module" config CAMERA_MODEL_ESP_EYE bool "ESP_EYE DevKit" config CAMERA_MODEL_M5STACK_PSRAM bool "M5Stack Camera With PSRAM" config CAMERA_MODEL_M5STACK_WIDE bool "M5Stack Camera F (Wide)" config CAMERA_MODEL_AI_THINKER bool "ESP32-CAM by AI-Thinker" config CAMERA_MODEL_CUSTOM bool "Custom Camera Pinout" endchoice config CAMERA_PIN_PWDN depends on CAMERA_MODEL_CUSTOM int "Power Down pin" range -1 33 default -1 help Select Power Down pin or -1 for unmanaged. config CAMERA_PIN_RESET depends on CAMERA_MODEL_CUSTOM int "Reset pin" range -1 33 default -1 help Select Camera Reset pin or -1 for software reset. config CAMERA_PIN_XCLK depends on CAMERA_MODEL_CUSTOM int "XCLK pin" range 0 33 default 21 help Select Camera XCLK pin. config CAMERA_PIN_SIOD depends on CAMERA_MODEL_CUSTOM int "SIOD pin" range 0 33 default 26 help Select Camera SIOD pin. config CAMERA_PIN_SIOC depends on CAMERA_MODEL_CUSTOM int "SIOC pin" range 0 33 default 27 help Select Camera SIOC pin. config CAMERA_PIN_VSYNC depends on CAMERA_MODEL_CUSTOM int "VSYNC pin" range 0 39 default 25 help Select Camera VSYNC pin. config CAMERA_PIN_HREF depends on CAMERA_MODEL_CUSTOM int "HREF pin" range 0 39 default 23 help Select Camera HREF pin. config CAMERA_PIN_PCLK depends on CAMERA_MODEL_CUSTOM int "PCLK pin" range 0 39 default 25 help Select Camera PCLK pin. config CAMERA_PIN_Y2 depends on CAMERA_MODEL_CUSTOM int "Y2 pin" range 0 39 default 4 help Select Camera Y2 pin. config CAMERA_PIN_Y3 depends on CAMERA_MODEL_CUSTOM int "Y3 pin" range 0 39 default 5 help Select Camera Y3 pin. config CAMERA_PIN_Y4 depends on CAMERA_MODEL_CUSTOM int "Y4 pin" range 0 39 default 18 help Select Camera Y4 pin. config CAMERA_PIN_Y5 depends on CAMERA_MODEL_CUSTOM int "Y5 pin" range 0 39 default 19 help Select Camera Y5 pin. config CAMERA_PIN_Y6 depends on CAMERA_MODEL_CUSTOM int "Y6 pin" range 0 39 default 36 help Select Camera Y6 pin. config CAMERA_PIN_Y7 depends on CAMERA_MODEL_CUSTOM int "Y7 pin" range 0 39 default 39 help Select Camera Y7 pin. config CAMERA_PIN_Y8 depends on CAMERA_MODEL_CUSTOM int "Y8 pin" range 0 39 default 34 help Select Camera Y8 pin. config CAMERA_PIN_Y9 depends on CAMERA_MODEL_CUSTOM int "Y9 pin" range 0 39 default 35 help Select Camera Y9 pin. endmenu config ESP_FACE_DETECT_ENABLED bool "ESP-WHO Face Detection" default y help Enables ESP-WHO Face Detection through the web interface. choice ESP_FACE_DETECT_MODEL bool "Detection Model" depends on ESP_FACE_DETECT_ENABLED default ESP_FACE_DETECT_MTMN config ESP_FACE_DETECT_MTMN bool "MTMN" config ESP_FACE_DETECT_LSSH bool "LSSH" endchoice config ESP_FACE_RECOGNITION_ENABLED bool "ESP-WHO Face Recognition" depends on ESP_FACE_DETECT_MTMN default y help Enables ESP-WHO Face Recognition through the web interface. endmenu