#include "who_camera.h" #include "esp_log.h" #include "esp_system.h" static const char *TAG = "who_camera"; static QueueHandle_t xQueueFrameO = NULL; static void task_process_handler(void *arg) { while (true) { camera_fb_t *frame = esp_camera_fb_get(); if (frame) xQueueSend(xQueueFrameO, &frame, portMAX_DELAY); } } void register_camera(const pixformat_t pixel_fromat, const framesize_t frame_size, const uint8_t fb_count, const QueueHandle_t frame_o) { ESP_LOGI(TAG, "Camera module is %s", CAMERA_MODULE_NAME); #if CONFIG_CAMERA_MODULE_ESP_EYE || CONFIG_CAMERA_MODULE_ESP32_CAM_BOARD /* IO13, IO14 is designed for JTAG by default, * to use it as generalized input, * firstly declair it as pullup input */ gpio_config_t conf; conf.mode = GPIO_MODE_INPUT; conf.pull_up_en = GPIO_PULLUP_ENABLE; conf.pull_down_en = GPIO_PULLDOWN_DISABLE; conf.intr_type = GPIO_INTR_DISABLE; conf.pin_bit_mask = 1LL << 13; gpio_config(&conf); conf.pin_bit_mask = 1LL << 14; gpio_config(&conf); #endif camera_config_t config; config.ledc_channel = LEDC_CHANNEL_0; config.ledc_timer = LEDC_TIMER_0; config.pin_d0 = CAMERA_PIN_D0; config.pin_d1 = CAMERA_PIN_D1; config.pin_d2 = CAMERA_PIN_D2; config.pin_d3 = CAMERA_PIN_D3; config.pin_d4 = CAMERA_PIN_D4; config.pin_d5 = CAMERA_PIN_D5; config.pin_d6 = CAMERA_PIN_D6; config.pin_d7 = CAMERA_PIN_D7; config.pin_xclk = CAMERA_PIN_XCLK; config.pin_pclk = CAMERA_PIN_PCLK; config.pin_vsync = CAMERA_PIN_VSYNC; config.pin_href = CAMERA_PIN_HREF; config.pin_sscb_sda = CAMERA_PIN_SIOD; config.pin_sscb_scl = CAMERA_PIN_SIOC; config.pin_pwdn = CAMERA_PIN_PWDN; config.pin_reset = CAMERA_PIN_RESET; config.xclk_freq_hz = XCLK_FREQ_HZ; config.pixel_format = pixel_fromat; config.frame_size = frame_size; config.jpeg_quality = 12; config.fb_count = fb_count; config.fb_location = CAMERA_FB_IN_PSRAM; config.grab_mode = CAMERA_GRAB_WHEN_EMPTY; // camera init esp_err_t err = esp_camera_init(&config); if (err != ESP_OK) { ESP_LOGE(TAG, "Camera init failed with error 0x%x", err); return; } sensor_t *s = esp_camera_sensor_get(); s->set_vflip(s, 1); //flip it back //initial sensors are flipped vertically and colors are a bit saturated if (s->id.PID == OV3660_PID) { s->set_brightness(s, 1); //up the brightness just a bit s->set_saturation(s, -2); //lower the saturation } xQueueFrameO = frame_o; xTaskCreatePinnedToCore(task_process_handler, TAG, 2 * 1024, NULL, 5, NULL, 1); }