esp-who/examples/single_chip/camera_web_server
XiaochaoGONG 3b6546eedb Bugfix/change alloc interface 2019-10-22 19:09:35 +08:00
..
main Bugfix/change alloc interface 2019-10-22 19:09:35 +08:00
CMakeLists.txt add cmake 2019-04-01 20:23:29 +08:00
Makefile Add Camera Web Server Example 2018-11-29 11:23:06 +01:00
README.md update docu 2019-06-04 15:34:25 +08:00
partitions.csv bb800f9a update esp-face add frmn models 2019-06-19 14:26:58 +08:00
sdkconfig.defaults Feature/http recog 2018-12-29 18:02:22 +08:00

README.md

Camera with Web Server

Preparation

To run this example, you need the following components:

  • An ESP32 Module: Either ESP32-WROVER-KIT or ESP-EYE, which we highly recommend for beginners, is used in this example.
  • A Camera Module: Either OV2640 or OV3660 image sensor, which we highly recommend for beginners, is used in this example.

Quick Start

After you've completed the hardware settings, please follow the steps below:

  1. Connect the camera to ESP32 module. For connection pins, please see here
  2. Configure the example through idf.py menuconfig;
  3. Build And Flash the application to ESP32;
  4. Open Your Browser and point it to http://[ip-of-esp32]/;
  5. To Get Image press Get Still or Start Stream;
  6. Use The Options to enable/disable Face Detection, Face Recognition and more;

For more details of the http handler, please refer to esp32-camera.