esp-who/examples/single_chip/detection_with_web/main/Kconfig.projbuild

291 lines
6.1 KiB
Plaintext

menu "Camera Web Server"
menu "WiFi Settings"
config ESP_HOST_NAME
string "Camera Host Name"
default ""
help
Hostname that the camera will advertise over mDNS.
config ESP_WIFI_SSID
string "WiFi STA SSID"
default ""
help
WiFi SSID (network name) to connect to or empty for Off.
config ESP_WIFI_PASSWORD
string "WiFi STA Password"
default ""
help
WiFi Password if WEP/WPA/WPA2 or empty if Open.
config ESP_WIFI_AP_SSID
string "WiFi AP SSID"
default "ESP32-Camera"
help
AP SSID (network name) to create or empty for Off.
config ESP_WIFI_AP_PASSWORD
string "WiFi AP Password"
default ""
help
AP password for WPA2 or empty for Open.
config MAX_STA_CONN
int "Maximal STA connections"
default 1
help
Max number of the STA connects to AP.
config ESP_WIFI_AP_CHANNEL
string "WiFi AP Channel"
default ""
help
AP channel for better connection performance.
config SERVER_IP
string "WiFi AP IP Address"
default "192.168.4.1"
help
IP address that the ESP will assign to it's AP interface. You can use this IP to connect to the camera after flashing.
config ESP_MAXIMUM_RETRY
int "Maximum retry"
default 5
help
Set the Maximum retry to avoid station reconnecting to the AP unlimited when the AP is really inexistent.
endmenu
menu "LED Illuminator"
config LED_ILLUMINATOR_ENABLED
bool "LED Illuminator Enabled"
default n
help
Enable an LED Flash or IR Illuminator
config LED_LEDC_PIN
depends on LED_ILLUMINATOR_ENABLED
int "LED Illuminator GPIO Pin"
range 0 33
default 4
help
Set a pin to illuminate an onboard LED or IR Illuminator when streaming or taking snapshots.
config LED_MAX_INTENSITY
depends on LED_ILLUMINATOR_ENABLED
int "LED Maximum Intensity (0-255)"
range 0 255
default 255
help
Limit the maximum intensity of the LED while streaming to prevent overheating (0-255).
choice LED_LEDC_SPEED_MODE
depends on LED_ILLUMINATOR_ENABLED
bool "Select LEDC Timer Speed Mode"
default LED_LEDC_LOW_SPEED_MODE
help
Select a speed mode for the LEDC channel
config LED_LEDC_LOW_SPEED_MODE
bool "LOW_SPEED_MODE"
config LED_LEDC_HIGH_SPEED_MODE
bool "HIGH_SPEED_MODE"
endchoice
config LED_LEDC_TIMER
depends on LED_ILLUMINATOR_ENABLED
int "LEDC Timer"
range 0 3
default 1
help
Select the LEDC Timer (0-3)
config LED_LEDC_CHANNEL
depends on LED_ILLUMINATOR_ENABLED
int "LEDC Channel"
range 0 7
default 1
help
Select the LEDC Channel (0-7)
endmenu
menu "Camera Pins"
choice CAMERA_MODEL
bool "Select Camera Pinout"
default CAMERA_MODEL_WROVER_KIT
help
Select Camera Pinout.
config CAMERA_MODEL_WROVER_KIT
bool "WROVER-KIT With OV2640 Module"
config CAMERA_MODEL_ESP32_CAM_BOARD
bool "ESP32 Camera Development Board"
config CAMERA_MODEL_ESP_EYE
bool "ESP_EYE DevKit"
config CAMERA_MODEL_M5STACK_PSRAM
bool "M5Stack Camera With PSRAM"
config CAMERA_MODEL_M5STACK_WIDE
bool "M5Stack Camera F (Wide)"
config CAMERA_MODEL_AI_THINKER
bool "ESP32-CAM by AI-Thinker"
config CAMERA_MODEL_CUSTOM
bool "Custom Camera Pinout"
endchoice
config CAMERA_PIN_PWDN
depends on CAMERA_MODEL_CUSTOM
int "Power Down pin"
range -1 33
default -1
help
Select Power Down pin or -1 for unmanaged.
config CAMERA_PIN_RESET
depends on CAMERA_MODEL_CUSTOM
int "Reset pin"
range -1 33
default -1
help
Select Camera Reset pin or -1 for software reset.
config CAMERA_PIN_XCLK
depends on CAMERA_MODEL_CUSTOM
int "XCLK pin"
range 0 33
default 21
help
Select Camera XCLK pin.
config CAMERA_PIN_SIOD
depends on CAMERA_MODEL_CUSTOM
int "SIOD pin"
range 0 33
default 26
help
Select Camera SIOD pin.
config CAMERA_PIN_SIOC
depends on CAMERA_MODEL_CUSTOM
int "SIOC pin"
range 0 33
default 27
help
Select Camera SIOC pin.
config CAMERA_PIN_VSYNC
depends on CAMERA_MODEL_CUSTOM
int "VSYNC pin"
range 0 39
default 25
help
Select Camera VSYNC pin.
config CAMERA_PIN_HREF
depends on CAMERA_MODEL_CUSTOM
int "HREF pin"
range 0 39
default 23
help
Select Camera HREF pin.
config CAMERA_PIN_PCLK
depends on CAMERA_MODEL_CUSTOM
int "PCLK pin"
range 0 39
default 25
help
Select Camera PCLK pin.
config CAMERA_PIN_Y2
depends on CAMERA_MODEL_CUSTOM
int "Y2 pin"
range 0 39
default 4
help
Select Camera Y2 pin.
config CAMERA_PIN_Y3
depends on CAMERA_MODEL_CUSTOM
int "Y3 pin"
range 0 39
default 5
help
Select Camera Y3 pin.
config CAMERA_PIN_Y4
depends on CAMERA_MODEL_CUSTOM
int "Y4 pin"
range 0 39
default 18
help
Select Camera Y4 pin.
config CAMERA_PIN_Y5
depends on CAMERA_MODEL_CUSTOM
int "Y5 pin"
range 0 39
default 19
help
Select Camera Y5 pin.
config CAMERA_PIN_Y6
depends on CAMERA_MODEL_CUSTOM
int "Y6 pin"
range 0 39
default 36
help
Select Camera Y6 pin.
config CAMERA_PIN_Y7
depends on CAMERA_MODEL_CUSTOM
int "Y7 pin"
range 0 39
default 39
help
Select Camera Y7 pin.
config CAMERA_PIN_Y8
depends on CAMERA_MODEL_CUSTOM
int "Y8 pin"
range 0 39
default 34
help
Select Camera Y8 pin.
config CAMERA_PIN_Y9
depends on CAMERA_MODEL_CUSTOM
int "Y9 pin"
range 0 39
default 35
help
Select Camera Y9 pin.
endmenu
config ESP_FACE_DETECT_ENABLED
bool "ESP-WHO Face Detection"
default y
help
Enables ESP-WHO Face Detection through the web interface.
choice ESP_FACE_DETECT_MODEL
bool "Detection Model"
depends on ESP_FACE_DETECT_ENABLED
default ESP_FACE_DETECT_MTMN
config ESP_FACE_DETECT_MTMN
bool "MTMN"
config ESP_FACE_DETECT_LSSH
bool "LSSH"
endchoice
config ESP_FACE_RECOGNITION_ENABLED
bool "ESP-WHO Face Recognition"
depends on ESP_FACE_DETECT_MTMN
default y
help
Enables ESP-WHO Face Recognition through the web interface.
endmenu