esp-who/examples/single_chip/camera_web_server
Kevincoooool d73a3c0163 Add KS-DIY esp32-s3 based camera series pin map 2021-12-07 16:12:48 +08:00
..
main Add KS-DIY esp32-s3 based camera series pin map 2021-12-07 16:12:48 +08:00
README.md update formating 2020-09-03 20:00:48 -06:00

README.md

Camera with Web Server

Preparation

To run this example, you need the following components:

  • An ESP32 Module: Either ESP32-WROVER-KIT or ESP-EYE, which we highly recommend for beginners, is used in this example.
  • A Camera Module: Either OV2640 or OV3660 or OV5640 image sensor, which we highly recommend for beginners, is used in this example.

Quick Start

After you've completed the hardware settings, please follow the steps below:

  1. Connect the camera to ESP32 module. For connection pins, please see here
  2. Configure the example through idf.py menuconfig;
  3. Build And Flash the application to ESP32;
  4. Open Your Browser and point it to http://[ip-of-esp32]/;
  5. To Get Image press Get Still or Start Stream;
  6. Use The Options to enable/disable Face Detection, Face Recognition and more;
  7. View The Stream in a player like VLC: Open Network http://[ip-of-esp32]:81/stream;

For more details of the http handler, please refer to esp32-camera.