esp-who/examples/single_chip/camera_web_server/README.md

Camera with Web Server

Preparation

To run this example, you need the following components:

• An ESP32 Module: Either ESP32-WROVER-KIT or ESP-EYE, which we highly recommend for beginners, is used in this example.
• A Camera Module: Either OV2640 or OV3660 image sensor, which we highly recommend for beginners, is used in this example.

Quick Start

After you've completed the hardware settings, please follow the steps below:

1. Connect the camera to ESP32 module. For connection pins, please see here
2. Configure the example through idf.py menuconfig;
3. Build And Flash the application to ESP32;
4. Open Your Browser and point it to http://[ip-of-esp32]/;
5. To Get Image press Get Still or Start Stream;
6. Use The Options to enable/disable Face Detection, Face Recognition and more;

For more details of the http handler, please refer to esp32-camera.